SCT SF3 Power Flash Ford Programmer
-
Increases Horsepower & Torque!
The SF3 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT's pre-loaded performance or fuel economy tune files is as easy as 1-2-3. Simply plug the OBDII connector into your vehicle's OBDII port, select the pre-loaded tune file using the simple to navigate menu and within minutes the SF3 programs your vehicle. -
Easy to Read On Screen Data Monitoring
With a HUGE Backlit display, the SCT SF3 Power Flash makes it EASY to read the Built-In Data Logging or Real Time Monitored Vehicle Data, view popular sensor data such as EGT, Air / Fuel Ratio or any other 0-5 Volt source! -
Easy to Install & Easy Return To Stock
The SF3 Power Flash device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. Restoring your vehicle to the stock PCM program is as easy as selecting Return to Stock from the device menu.
-
Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage -
Huge Backlit LCD Display
Huge backlit LCD display for easy viewing, day or night. -
Reads/Clears DTC Trouble Codes
Reads and clears diagnostic trouble codes quickly & easily, saving on expensive diagnostic fees. -
Dual Analog Inputs
Monitor EGT temps, air-fuel ratio and other popular sensor data. -
Installs Quickly & Easily
Installs in minutes via your vehicle's ODB-II port -
User Adjustable Vehicle Parameters
Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears
-
Stores 3 Custom Tunes
Stores up to 3 custom tune files created by your local SCT Custom Tuning Dealer. -
High Speed Datalogging / Monitoring
View & record your vehicles PCM data on the LCD screen or on your laptop. -
Easy Restoration Back to Stock
Stores your vehicles factory tune file for easy restoration back to the stock program. -
Most Popular Vehicles Supported
Most popular Ford vehicles supported including 2011 models. -
USB Interface Cable Included
USB Interface Cable & Livelink Datalogging software included
* Adjustable Options vary for each vehicle and are not available on all vehicles
-
Rear O2's Disabled
Disables the Rear O2s and eliminates CEL caused by rear O2 removal. -
Fuel Injectors
Allows you to adjust for different sized fuel injectors. -
CMCV Delete Plates
Allows you to disable the CMCV (Charge Motion Control Valve) in your vehicles PCM to prevent a Check Engine light and other issues associated with removing the CMCV plates in your vehicle. -
Speed Limiter
Allows you to Remove, Increase or Decrease the vehicles speed limiter. -
Idle Speed
Allows you to Increase or Decrease the vehicles idle speed. -
Traction Control
Allows you to disable the vehicles Traction Control without using the button in the vehicle. -
Spark Modification by RPM
Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000) -
WOT Fuel
Allows you to Add or Remove Fuel at Wide Open Throttle.
-
Shift Firmness Control
Allows you to change the transmissions shift pressure. Controls how firm the shifts will feel. * Vehicles with Automatic Transmissions ONLY -
Axle Ratio
Allow you to set the axle ratio (gear ratio) to correct shift patterns and the speedometer on your vehicle. -
Tire Size
Allows you to set the tire size to correct shift patterns and the speedometer on your vehicle. -
Aftermarket Intake
Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits. -
Stores Stock Tune
Stores a true copy of your vehicle's stock file before programming. Used for warranty repairs and unlocking the programmer. -
Supports Custom Tune
Supports and holds up to 3 custom tunes. -
Fan Control
Lowers the Temperature at which the Fan turns on.
-
Idle Speed
Allows you to Increase or Decrease the vehicles idle speed. -
Rev / RPM Limiter in Drive
Allows you to Remove, Increase or Decrease the vehicles Rev / RPM limiter in Drive -
Rev / RPM Limiter Neutral
Allows you to Remove, Increase or Decrease the vehicles Rev / RPM limiter in Neutral -
Speed Limiter
Allows you to Remove, Increase or Decrease the vehicles speed limiter. -
Fan Control
Lowers the Temperature at which the Fan turns on.
-
WOT Fuel
Allows you to Add or Remove Fuel at Wide Open Throttle. -
Axle Ratio
Allow you to set the axle ratio (gear ratio) to correct shift patterns and the speedometer on your vehicle. -
Tire Size
Allows you to set the tire size to correct shift patterns and the speedometer on your vehicle. -
WOT Shift Points by Gear
Allows you to Increase or Decrease the Wide Open Throttle Shift points of each gear individually. -
Shift Firmness Control
Allows you to change the transmissions shift pressure. Controls how firm the shifts will feel. * Vehicles with Automatic Transmissions ONLY
96-08 Ford Cars, Lightning/Harley, F Series Gas And Diesel Powered Trucks Sf3 Power Flash Device This Also Has The Same Firmware As The 3000, ECO BOOST for the 11-12 F150 3.5L twin turbo.
